Product Brief

Model: XH0801-T keyboard and mouse synchronizer transmits keyboard and mouse signals synchronously to all controlled computers in a pure hardware way, so as to achieve accu rate synchronization effect, drive-free and power-free.

Product characteristics

1. High-speed USB input and output;

2. All controlled computers are fully synchronized without delay.

3. Synchronizer supports cascade, complete synchronization after cascade, no delay;

4. Synchronizer is powered by PC mainframe without additional external power supply.

5. Synchronizer supports continuous transmission function.

6. There is no need to install other software or drivers, and there is no risk of blocking.

7. Synchronizer supports a variety of working modes and is suitable for different games and software.

8. Synchronizer supports high-precision positioning mechanism.

9. Synchronizer supports wireless keyboard and mouse.

Installation method

Step 1: Turn on the computer;

Step 2: The computer enters the desktop and connects the keyboard and mouse to the synchronizer firt.

Step 3: Connect to synchronizer and computer with USB cable (firt installation must be done in sequence)

Keyboard and mouse function:

Continuous function: Press Scroll Lock, and then press the key that needs to be set.

Cancel Release: Press Scroll Lock and press the key that has been set for Release.

After setting the key, you can press the key directly, switch the synchronizer automatically to send the corresponding key at the speed of 30 times per second, and stop the key after loosening the key. When the switching synchronizer is powered off, the set connection key is not reserved.

Keyboard Switching Method Control

Keyboard Switch 1

This mode of switching can be controlled by any computer or all computers, and is effective for the keyboard and mouse of the computer.

Switching method: 0.6 on keypad * + keypad (take - control six as an example) press "*" key, then press "1" key, switch to the fist computer controlled; press "*" key, then press "2" key, switch to the second computer controlled; hold "*" key, then press "3" key, switch to the third computer controlled; press "*" key, switch to the third computer controlled; Then press the "4" key, switch to the fourth computer controllable; press the "*" key, then press the "5" key, switch to the fifth computer controllable; press the "*" key, then press the "6" key, switch to the sixth computer controllable; press the "*" key, then press the "0" key, switch to the six computers controllable.

Note: When switching over, which indicator lights are on, indicating that the corresponding computer, keyboard and mouse are all valid.

Keyboard Switch II:

This way of switching can make any computer or all computers out of synchronization, other controlled computers remain unchanged.

Switching method: the right key on the keyboard + 1.6 on the keypad (take control six as an example) press the subscription key, then press the "1" key, the firt computer quits synchronization; press the key, then press the "2" key, the second computer quits synchronization; press the key, then press the "3" key, the third computer quits synchronization; press the hold number key, and then the second computer quits synchronization. Press the "4" key, the fourth computer quits synchronization; press the hold number key, then press the "5" key, the fifth computer quits synchronization; press the key, then press the "6" key, the sixth computer quits synchronization;